Installing the keypad to your Ford keyless entry system lets you control the door locks and trunk from a distance by urgent a button. This is helpful in dangerous weather or in the event you overlook to lock the door. The keyless entry distant also has a panic button that sounds an alarm when pressed. The panic button is helpful if you get harm or attacked in a parking zone and want help.
Ford Keyless Entry Keypad Installation Instructions
1. Put the important thing into the ignition and switch it from the “Off” place to the “On” place eight occasions inside 10 seconds. Make certain to finish with the important thing turned to the “On” position. Bear in mind, you have greater than a full second to finish every turn, so do not panic and make sure to rely the number of occasions you turn the key. When you’ve accomplished this correctly, the doors lock and unlock to indicate the car has entered the programming mode.
2. Press any button on the remote whereas the car is within the programming mode. The car stays in programming mode for 20 seconds. The car catches the signal and programs the distant to the system.
The car does not keep in programming mode lengthy, so different individuals can’t program a distant to your car. Repeat this step within 20 seconds of programming the previous remote to program extra remotes. The doorways lock and unlock after each distant has been programmed.
3. Turn the key from the “On” position to the “Off” position. This has the automotive exit the programming mode. The doorways lock and unlock to verify that it has exited programming mode and no different remotes will have the ability to be programmed to your automobile with out repeating the whole process.